Recent Changes - Search:
Schedules /

LBA Schedule and Observing Roster for Hobart, June 2013

Useful links:

Session Notes:

  • Hobart observers must operate Ceduna (with disk change/setup change assistance from Bev)
  • Please remember to stick a post-it note with the experiment name on the disks when you remove them!
  • Don't forget to update the ATNF wiki for each experiment. Bare minimum is frequencies, DAS profile and disks. Add any other relevant information. (See past entries for reference.)

Observing & Monitoring Checklists:

Observing setup checklist for Hobart and Ceduna can be found here.

Observing Roster for Hobart:

Shift time (local AEST)Experiment(s)BandNotesDifficultyObserver
Thu 13 Jun 07:00 - Thu 13 Jun 17:00vt02t, vc205, v498a22 GHz Medium/hardStas
Thu 13 Jun 17:00 - Fri 14 Jun 09:00v498a, vc206, v490a22 GHzSimon's experimentMedium/hardSimon
Fri 14 Jun 09:00 - Fri 14 Jun 17:00v490a22 GHzSimon's experiment; IVS at same time (Dave)EasyDave
Fri 14 Jun 17:00 - Sat 15 Jun 09:00v490a, vt10o, vc207, v252ak?, 8.4 GHzIVS at same time (Anita)MediumAnita
Sat 15 Jun 09:00 - Sat 15 Jun 19:00v252ak8.4 GHz EasyDave
Sat 15 Jun 19:00 - Sun 16 Jun 09:00v252ak, vc208, vx017b, vc209, v271m8.4 GHzSwitch to Mk5 recorder for v271m; tricky mode for vx017b?Medium/hardJamie M
Sun 16 Jun 09:00 - Sun 16 Jun 21:00v271m8.4 GHz EasyWarren
Sun 16 Jun 21:00 - Mon 17 Jun 09:00v271m, vt10p8.4 GHzRecorder back to DASMediumJD
Mon 17 Jun 09:00 - Mon 17 Jun 17:00vt10p, vc210, v255s8.4, 6.7 GHzSimon/Vasaant's experiment; receiver changeMedium/hardVasaant
Mon 17 Jun 17:00 - Tue 18 Jun 08:00v255s6.7 GHzSimon/Vasaant's experiment; IVS at same time (Anita)EasyAnita

Setup Notes:

Hobart

ExperimentConfigurationAgilentLO (SML01/Agilent1)Tone (SMY01)DAS ProfileDisks/Data quantityStart time (ADST)Notes
vt02t22GHz-2p-4IF/1616.6??? MHz??? MHzVSOP_HO.PRODisk AThu 14 08:00Test observations
vc205, v498a22GHz-2p-4IF/1616.6 GHz706/706 MHz889.4 MHzVSOP_HO.PRODisk AThu 13 16:30RCP/LCP
vc206a, vc206b, v490a22GHz-2p-4IF/1616.37 GHz425 & 706/206 MHz (ICRF mode)888.64 & 880.2/900.2 MHzVSOP_HO.PRODisk BFri 14 04:00Frequency changes throughout experiment.
vt10o?????? GHz??? MHz??? MHz??? .PRODisk A14 18:00Test observation
vc207, vc207h, v252ak8.4GHz-1p-4IF/1614777/809841.4/844.6VSOP.PRODisk C15 20:30Rx6 (multifeed), RCP only! Use PalfreymansClient.sh to select RCP for both channels. Remove Disk A and replace with Disk D
vc208, vx017b?????? GHz??? MHz??? MHz???.PRODisk B16 20:00 
vc209, v271m8.4GHz-1p-8IF/16N/AN/AN/AN/A (mark5)Mark5 module17 05:00Uses S/X receiver and requires patching of IF 4 from high to low. Remove disks B and C and replace with D and E
vt10p???????????????.PRODisk D18 07:00 
vc210a,vc210b, v255s6.7GHz-2p-2IF/1612.2 GHz810 & 468/810 (ICRF mode) MHz664.7 & 630.5/664.7 MHzVSOP.PRODisk DMon 17 12:00Frequency changes throughout experiment

Ceduna

ExperimentConfigurationAgilentLO (SML01/Agilent1)Tone (SMY01)DAS ProfileDisks/Data quantityStart time (ADST)Notes
vt02t22GHz-2p-4IF/1616.6??? MHz??? MHzVSOP_HO.PRODisk AThu 14 08:00Test observations
vc205, v498a22GHz-2p-4IF/1617.4 GHz406/406 MHz889.4 MHzVSOP_HO.PRODisk AThu 13 16:30RCP/LCP
vc206a, vc206b, v490a22GHz-2p-4IF/1617.47 GHz425 & 706/206 MHz (ICRF mode)888.64 & 880.2/900.2 MHzVSOP_HO.PRODisk BFri 14 04:00Frequency changes throughout experiment.
Rx change       
vc207, vc207h, v252ak8.4GHz-1p-4IF/1613.04637/669841.4/844.6VSOP.PRO 15 20:30RCP only! Use Folly interface and set switches to X0XX
vc208, vx017b?????? GHz??? MHz??? MHz???.PRO 16 20:00 
vc209, v271m8.4GHz-1p-8IF/1613.04428/684820.5/846.1VSOP.PRO 17 05:00RCP only (use Folly)
Rx and disk change       
vc210a,vc210b, v255s6.7GHz-2p-2IF/1611.1 GHz810/810 & 468/810 (ICRF mode) MHz664.7 & 630.5/664.7 MHzVSOP.PRO Mon 17 12:00Frequency changes throughout experiment