C Disko
Standard modes for LBA experiments.
For experiments using VSOP.PRO (or any VSOP* profile), the standard settings for cDisko are listed below. You will need to
| Experiment name | As listed |
| Recording Time | Use the exact length only if you are using scheduled start |
| Start Time | As listed. Only used if the button to the right of this reads "Enabled" |
| Bandwidth (MHz) | 16 |
| Channels | Chans 1 -> 4 |
| Disk Selection | As listed in the notes |
| Rounded Start? | Normally enabled but check with Chris Phillips on the LBA chat |
| Mark5B Recording? | disabled unless specifically instructed |
For experiments using the BG3 cable and the 64MHZ_*.PRO profile, the settings are below.
| Experiment name | As listed |
| Recording Time | Use the exact length only if you are using scheduled start |
| Start Time | As listed. Only used if the button to the right of this reads "Enabled" |
| Bandwidth (MHz) | 64 |
| Channels | Chans 1,2 |
| Disk Selection | As listed in the notes |
| Rounded Start? | Normally enabled but check with Chris Phillips on the LBA chat |
| Mark5B Recording? | disabled unless specifically instructed |