Hobart from Newsmerd
Consider doing this from a VNC session on newsmerd as this will allow remote control and monitoring. Try connecting first with:
If that doesn’t work, start a VNC server with:
… and then start up a vncviewer.
Use secure shell login as user “oper” to Hobart from Newsmerd terminal.
Then type the following to begin field system,
In a new shell, again login as user “oper” to Hobart from Newsmerd terminal.
Start the stalm task and window, (remember the ampersand at the end of the following commands, otherwise you’ll need a new ssh login window)
Start MK5 vc monitor,
Start status monitor,
Now continue with IVS setup… IVS Observing