Recent Changes - Search:

HomePage

LBA

Mt Pleasant 26m

Ceduna 30m

Mt Pleasant 14m

Ceduna-Hobart Interferometer

Schedules

AuScope

PmWiki

edit SideBar

Mt Pleasant 14m

Main.MtPleasant14m History

Hide minor edits - Show changes to markup

June 15, 2016, at 12:20 AM by 131.217.63.172 -
Changed lines 16-17 from:
to:
April 03, 2016, at 11:42 PM by 131.217.63.172 -
Changed lines 15-18 from:
to:

Observatory Specific Documentation


January 13, 2016, at 11:36 AM by 131.217.63.137 -
Added line 23:
Added lines 28-30:

The cracks have been welded and reinforcing material added for strength. New bearings have been fitted to the elevation axis. The dish is back on the pedestal.

January 13, 2016, at 11:33 AM by 131.217.63.137 -
Changed lines 35-36 from:

here be text

to:

The receiver is currently on the bench for testing. Limit switches require pull-up resistors to draw more current to wet the contacts to stop surface corrosion.

January 13, 2016, at 11:30 AM by 131.217.63.137 -
Changed lines 3-4 from:

The 14m telescope located at the Mt Pleasant observatory is currently undergoing structural repairs as well as motor and receiver installation. This wiki will document the ongoing status of said maintenance.

to:

Ariel view of the 14m showing construction of the Astronomical Society of Tasmania observatory facilities to the right.

The 14m telescope located at the Mt Pleasant observatory is currently undergoing structural repairs as well as motor and receiver installation. This wiki documents the ongoing status of the refurbishment.

January 13, 2016, at 05:28 AM by 131.217.63.137 -
Changed lines 31-32 from:

One green encoder cable appears broken, will need to be pulled and fixed or replaced. Elevation #2 encoder cable tested and working.

to:

Elevation #1 green encoder cable appears broken, will need to be pulled and fixed or replaced. Elevation #2 encoder cable tested and working.

January 13, 2016, at 05:28 AM by 131.217.63.137 -
Added lines 31-32:

One green encoder cable appears broken, will need to be pulled and fixed or replaced. Elevation #2 encoder cable tested and working.

January 13, 2016, at 05:23 AM by 131.217.63.137 -
Added line 35:
January 13, 2016, at 05:22 AM by 131.217.63.137 -
Added lines 34-36:

Network Blue ethernet cable running underground and down cable tray to 14m is cut in several places, needs replacing and securing.

February 06, 2014, at 11:08 PM by 131.217.6.7 -
Changed lines 18-29 from:

10/12/2013
Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points. The axle bearing requires replacement, and the metal structure requires further inspection. To proceed, the dish must be removed. Removing the dish will require a crane, but prior, counterweights should be removed. Dish should be secured to reduce the chance of collapse.

12/12/2013
In preparation for removing the dish, one counterweight was removed. Dish was secured to the frame to stop excessive movement.

16/12/2013
A base for the dish to sit on was constructed on the ground near the telescope, with concrete blocks to tie it down to. Second counterweight was removed.

18/12/2013
Dish was removed using a crane with four points of attachment. Process involved attaching dish to crane, removing the two altitude driving motors, unbolting the axle bearings, and lifting and moving the dish across to the base. Dish was then tied down to seven concrete blocks using chains and ropes at various points.

to:
Changed lines 27-30 from:

Motors require cleaning and testing. In order to properly set up control, decoders must be fitted; this requires custom adapters to be designed and built. Fashioned from an aluminium pipe, such adapters were created. Also, an Ethernet cable must be placed so that the motors can be controlled from the observatory.

to:
January 13, 2014, at 11:08 PM by 27.96.199.154 -
Changed lines 31-32 from:

Motors are in working order. In order to properly set up control, decoders must be fitted; this requires custom adapters to be designed and built. Fashioned from an aluminium pipe, such adapters were created.

to:

Motors require cleaning and testing. In order to properly set up control, decoders must be fitted; this requires custom adapters to be designed and built. Fashioned from an aluminium pipe, such adapters were created.

December 19, 2013, at 03:20 AM by 131.217.6.7 -
December 19, 2013, at 03:20 AM by 131.217.6.7 -
Changed lines 31-33 from:

New motors are in working order. In order to properly set up control, (word-which-escapes-me /noun /plural) must be fitted; this requires custom adapters to be designed and built. Fashioned from an aluminium pipe, such adapters were created. Also for control, an Ethernet cable must be placed so that the motors can be controlled from the observatory.

to:

Motors are in working order. In order to properly set up control, decoders must be fitted; this requires custom adapters to be designed and built. Fashioned from an aluminium pipe, such adapters were created. Also, an Ethernet cable must be placed so that the motors can be controlled from the observatory.

December 19, 2013, at 03:19 AM by 131.217.6.7 -
Added line 29:
December 19, 2013, at 03:18 AM by 131.217.6.7 -
Deleted lines 28-32:
December 19, 2013, at 03:18 AM by 131.217.6.7 -
Added lines 31-33:
December 19, 2013, at 03:17 AM by 131.217.6.7 -
Changed lines 24-27 from:

16/12/2012
A base for the dish to sit on was constructed on the ground near the telescope, with concrete blocks to tie it down to.

to:

16/12/2013
A base for the dish to sit on was constructed on the ground near the telescope, with concrete blocks to tie it down to. Second counterweight was removed.

18/12/2013
Dish was removed using a crane with four points of attachment. Process involved attaching dish to crane, removing the two altitude driving motors, unbolting the axle bearings, and lifting and moving the dish across to the base. Dish was then tied down to seven concrete blocks using chains and ropes at various points.

December 17, 2013, at 10:15 PM by 131.217.6.7 -
Changed lines 22-24 from:

In preparation for removing the dish, counterweights were removed. Dish was secured to concrete blocks.

to:

In preparation for removing the dish, one counterweight was removed. Dish was secured to the frame to stop excessive movement.

16/12/2012
A base for the dish to sit on was constructed on the ground near the telescope, with concrete blocks to tie it down to.

December 15, 2013, at 10:28 PM by 131.217.6.9 -
Deleted lines 24-26:

13/12/2013

December 15, 2013, at 10:26 PM by 131.217.6.9 -
Changed lines 53-54 from:

Originally an equatorial telescope installed near the Hobart airport in the mid 1960s. At the construction of the Mt Pleasant observatory, in the mid 1980s, the 14m telescope was upgraded to have azimuth control, as well as a new base structure.

to:

Originally an equatorial telescope installed near the Hobart airport in the mid 1960s. In the 1980s the telescope was reconstructed at the Mt Pleasant observatory, along with a new base structure and azimuth control.

December 13, 2013, at 03:55 AM by 131.217.6.7 -
Changed lines 53-54 from:

Originally an equatorial telescope installed near the Hobart airport in the mid 1960s.

to:

Originally an equatorial telescope installed near the Hobart airport in the mid 1960s. At the construction of the Mt Pleasant observatory, in the mid 1980s, the 14m telescope was upgraded to have azimuth control, as well as a new base structure.

December 13, 2013, at 02:20 AM by 131.217.6.7 -
Changed lines 11-12 from:
to:
Added lines 50-54:

Contents


History

Originally an equatorial telescope installed near the Hobart airport in the mid 1960s.

December 12, 2013, at 11:56 PM by 131.217.6.9 -
December 12, 2013, at 11:22 PM by 131.217.6.8 -
Changed lines 44-45 from:

http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg

to:

http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%282%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%283%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%284%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%285%29.jpg

December 12, 2013, at 11:21 PM by 131.217.6.8 -
Added lines 44-46:

http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg http://www.users.on.net/~cdadsl/14m/lowerres2/lowerres%20%281%29.jpg

Receiver\\

Deleted lines 48-50:

Receiver
insert pictures here

December 12, 2013, at 06:52 AM by 27.96.199.154 -
Changed lines 25-27 from:

DRAGONS! DRAGONS EVERYWHERE!

to:
December 12, 2013, at 05:19 AM by 131.217.6.6 -
Changed lines 48-49 from:

insert pictures here

to:

insert pictures here

December 12, 2013, at 05:19 AM by 131.217.6.6 -
Changed lines 33-34 from:

here be text\\

to:

here be text

Added line 49:
December 12, 2013, at 04:55 AM by 131.217.6.7 -
Changed line 29 from:

New motors are in working order. In order to properly set up control, (word which escapes me /noun /plural) must be fitted; this requires custom adapters to be designed and built. Fashioned from an aluminium pipe, such adapters were created.

to:

New motors are in working order. In order to properly set up control, (word-which-escapes-me /noun /plural) must be fitted; this requires custom adapters to be designed and built. Fashioned from an aluminium pipe, such adapters were created.

December 12, 2013, at 04:54 AM by 131.217.6.7 -
Changed line 29 from:

New motors are in working order. In order to properly set up control, (word which escapes me /noun) must be fitted; this requires custom adapters to be designed and built. Fashioned from an aluminium pipe, such adapters were created.

to:

New motors are in working order. In order to properly set up control, (word which escapes me /noun /plural) must be fitted; this requires custom adapters to be designed and built. Fashioned from an aluminium pipe, such adapters were created.

December 12, 2013, at 04:53 AM by 131.217.6.7 -
Changed lines 28-31 from:

Motor Installation here be text

Receiver Installation

to:

Motor Installation
New motors are in working order. In order to properly set up control, (word which escapes me /noun) must be fitted; this requires custom adapters to be designed and built. Fashioned from an aluminium pipe, such adapters were created. Also for control, an Ethernet cable must be placed so that the motors can be controlled from the observatory.

Receiver Installation\\

December 12, 2013, at 04:46 AM by 131.217.6.7 -
December 12, 2013, at 04:44 AM by 131.217.6.7 -
December 12, 2013, at 04:44 AM by 131.217.6.7 -
December 12, 2013, at 04:44 AM by 131.217.6.7 -
Changed lines 17-24 from:

10/12/2013//Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points. The axle bearing requires replacement, and the metal structure requires further inspection. To proceed, the dish must be removed. Removing the dish will require a crane, but prior, counterweights should be removed. Dish should be secured to reduce the chance of collapse.

12/12/2013\\In preparation for removing the dish, counterweights were removed. Dish was secured to concrete blocks.

13/12/2013//DRAGONS! DRAGONS EVERYWHERE!

to:

10/12/2013
Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points. The axle bearing requires replacement, and the metal structure requires further inspection. To proceed, the dish must be removed. Removing the dish will require a crane, but prior, counterweights should be removed. Dish should be secured to reduce the chance of collapse.

12/12/2013
In preparation for removing the dish, counterweights were removed. Dish was secured to concrete blocks.

13/12/2013
DRAGONS! DRAGONS EVERYWHERE!

December 12, 2013, at 04:43 AM by 131.217.6.7 -
Changed lines 19-21 from:

12/12/2013//In preparation for removing the dish, counterweights were removed. Dish was secured to concrete blocks.

to:

12/12/2013\\In preparation for removing the dish, counterweights were removed. Dish was secured to concrete blocks.

December 12, 2013, at 04:43 AM by 131.217.6.7 -
Changed lines 16-23 from:

10/12/2013\\Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points. The axle bearing requires replacement, and the metal structure requires further inspection. To proceed, the dish must be removed. Removing the dish will require a crane, but prior, counterweights should be removed. Dish should be secured to reduce the chance of collapse.

12/12/2013\\In preparation for removing the dish, counterweights were removed. Dish was secured to concrete blocks.

13/12/2013\\DRAGONS! DRAGONS EVERYWHERE!

to:

10/12/2013//Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points. The axle bearing requires replacement, and the metal structure requires further inspection. To proceed, the dish must be removed. Removing the dish will require a crane, but prior, counterweights should be removed. Dish should be secured to reduce the chance of collapse.

12/12/2013//In preparation for removing the dish, counterweights were removed. Dish was secured to concrete blocks.

13/12/2013//DRAGONS! DRAGONS EVERYWHERE!

December 12, 2013, at 04:42 AM by 131.217.6.7 -
Changed lines 16-23 from:
to:

10/12/2013\\Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points. The axle bearing requires replacement, and the metal structure requires further inspection. To proceed, the dish must be removed. Removing the dish will require a crane, but prior, counterweights should be removed. Dish should be secured to reduce the chance of collapse.

12/12/2013\\In preparation for removing the dish, counterweights were removed. Dish was secured to concrete blocks.

13/12/2013\\DRAGONS! DRAGONS EVERYWHERE!

December 12, 2013, at 04:41 AM by 131.217.6.7 -
Changed lines 21-23 from:
to:
December 12, 2013, at 04:41 AM by 131.217.6.7 -
Changed lines 16-17 from:

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points.

to:
December 12, 2013, at 04:24 AM by 131.217.6.7 -
Changed line 11 from:

THE PASSWORD IS WHATEVER I WANT IT TO BE

to:
December 12, 2013, at 04:24 AM by 131.217.6.7 -
Changed line 11 from:
to:

THE PASSWORD IS WHATEVER I WANT IT TO BE

December 12, 2013, at 04:23 AM by 131.217.6.7 -
December 12, 2013, at 04:23 AM by 131.217.6.7 -
Changed line 22 from:

here be text

to:

here be text\\

December 12, 2013, at 04:23 AM by 131.217.6.7 -
December 12, 2013, at 04:23 AM by 131.217.6.7 -
December 12, 2013, at 04:23 AM by 131.217.6.7 -
Added line 23:
December 12, 2013, at 04:22 AM by 131.217.6.7 -
Changed lines 7-9 from:
to:
  • Structural Repair
  • Motor Installation
  • Receiver Installation
December 12, 2013, at 04:21 AM by 131.217.6.7 -
Changed line 15 from:

Structural Repair

to:

Structural Repair

Changed line 18 from:

Motor Installation

to:

Motor Installation

Changed line 21 from:

Receiver Installation

to:

Receiver Installation

December 12, 2013, at 04:21 AM by 131.217.6.7 -
Changed line 6 from:
  • Work Required
to:
Changed lines 13-15 from:

Structural Repair

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points.
Contents

to:

Work Required

Structural Repair Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points.

Motor Installation here be text

Receiver Installation here be text

Deleted lines 23-30:

Motor Installation

here be text
Contents


Receiver Installation

here be text
Contents


December 12, 2013, at 04:18 AM by 131.217.6.7 -
December 12, 2013, at 04:07 AM by 131.217.6.9 -
Changed line 5 from:

Contents

to:

Contents

Changed line 15 from:
to:
Changed line 19 from:
to:
Changed line 23 from:
to:
Changed line 37 from:
to:
December 12, 2013, at 04:06 AM by 131.217.6.9 -
Changed lines 18-19 from:

here be text \\top

to:

here be text
top

Changed line 22 from:

here be text//

to:

here be text\\

Changed line 36 from:

insert pictures here//

to:

insert pictures here\\

December 12, 2013, at 04:05 AM by 131.217.6.9 -
Changed line 14 from:

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points.//

to:

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points.\\

Added lines 18-21:

here be text \\top


Receiver Installation

Deleted lines 24-27:

Receiver Installation

here be text// top


December 12, 2013, at 04:05 AM by 131.217.6.9 -
Changed lines 14-15 from:

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points. //top

to:

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points.// top

Changed lines 18-19 from:

here be text //top

to:

here be text// top

Changed lines 22-23 from:

here be text //top

to:

here be text// top

Changed lines 36-37 from:

insert pictures here //top

to:

insert pictures here// top

December 12, 2013, at 04:04 AM by 131.217.6.9 -
Changed line 15 from:
to:

//top

Changed line 19 from:
to:

//top

Changed line 23 from:
to:

//top

Changed line 37 from:
to:

//top

December 12, 2013, at 04:04 AM by 131.217.6.9 -
Changed line 1 from:
to:
Added line 15:
Added line 19:
Added line 23:
Changed lines 36-37 from:

insert pictures here

to:

insert pictures here top

December 12, 2013, at 04:02 AM by 131.217.6.9 -
Added line 1:
December 12, 2013, at 03:55 AM by 131.217.6.9 -
Added line 16:

here be text

Added line 19:

here be text

Changed line 22 from:

Structural

to:

Structural\\

Changed line 28 from:

Motor

to:

Motor\\

Changed line 31 from:

Receiver

to:

Receiver\\

December 12, 2013, at 03:53 AM by 131.217.6.9 -
Added line 2:
December 12, 2013, at 03:52 AM by 131.217.6.9 -
Deleted line 0:

Deleted line 1:

December 12, 2013, at 03:51 AM by 131.217.6.9 -
Changed line 21 from:

‘Structural’

to:

Structural

Changed line 27 from:

‘Motor’

to:

Motor

Changed line 30 from:

‘Receiver’

to:

Receiver

December 12, 2013, at 03:50 AM by 131.217.6.9 -
Changed line 21 from:

Structural

to:

‘Structural’

Changed line 27 from:

Motor

to:

‘Motor’

Changed line 30 from:

Receiver

to:

‘Receiver’

December 12, 2013, at 03:49 AM by 131.217.6.9 -
Changed lines 5-18 from:
to:
Changed line 16 from:

Motor Installation

to:

Motor Installation

Changed lines 18-31 from:

Receiver Installation

to:

Receiver Installation


All Pictures

Structural

http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%281%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%282%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%283%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%284%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%285%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%286%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%287%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%288%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%289%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2810%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2811%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2812%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2813%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2814%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2815%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2816%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2817%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2818%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2819%29.JPG http://www.users.on.net/~cdadsl/14m/lowerres/lores%20%2820%29.JPG

Motor

insert pictures here

Receiver

insert pictures here

December 12, 2013, at 03:44 AM by 131.217.6.9 -
Changed lines 5-6 from:

Work Required

  • Structural Repair
to:

Work Required

Added lines 10-18:
Changed line 20 from:

Structural Repair

to:

Structural Repair

December 12, 2013, at 03:37 AM by 131.217.6.9 -
Changed line 9 from:

.

to:
December 12, 2013, at 03:37 AM by 131.217.6.9 -
Changed line 9 from:

.

to:

.

December 12, 2013, at 03:36 AM by 131.217.6.9 -
Changed line 9 from:
to:

.

December 12, 2013, at 03:35 AM by 131.217.6.9 -
Added line 9:
Changed line 12 from:

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points. All pictures?.

to:

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points.

December 12, 2013, at 03:13 AM by 131.217.6.9 -
Changed line 11 from:

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points.

to:

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points. All pictures?.

December 12, 2013, at 02:54 AM by 131.217.6.8 -
Changed lines 15-17 from:

Receiver Installation

Mt Pleasant 14m

to:

Receiver Installation

December 12, 2013, at 02:53 AM by 131.217.6.8 -
Changed lines 10-17 from:

Structural Repair

to:

Structural Repair

Inspection of the telescope’s axle and bearing, for the elevation control, as well as the motor support structure, revealed that the large amount of stress imparted by the mass of the dish had cracked the axle bearing, and begun to break the support structure at several integral points.


Motor Installation


Receiver Installation

Mt Pleasant 14m

December 12, 2013, at 02:40 AM by 131.217.6.8 -
Changed line 6 from:
to:
  • Structural Repair
December 12, 2013, at 02:40 AM by 131.217.6.8 -
Changed lines 10-11 from:

Structural Repair

== {anchorPrinciples ==

to:

Structural Repair

December 12, 2013, at 02:39 AM by 131.217.6.8 -
Changed lines 10-11 from:

Structural Repair

to:

Structural Repair

== {anchorPrinciples ==

December 12, 2013, at 02:32 AM by 131.217.6.8 -
Changed line 10 from:

==Structural Repair==

to:

Structural Repair

December 12, 2013, at 02:32 AM by 131.217.6.8 -
Changed lines 10-37 from:

Structural Repair

to:

==Structural Repair==

December 12, 2013, at 02:28 AM by 131.217.6.8 -
Changed lines 5-11 from:

Repair

  • To Be Done
    • thing one
    • thing two
  • Already Done
    • thing one
    • thing two
to:

Work Required


Structural Repair

December 12, 2013, at 02:08 AM by 131.217.6.8 -
Changed lines 11-12 from:
  • thing two

to:
  • thing two
December 12, 2013, at 02:08 AM by 131.217.6.8 -
Changed lines 11-12 from:
  • thing two
to:
  • thing two

December 12, 2013, at 02:05 AM by 131.217.6.8 -
Changed line 4 from:

The 14m telescope <s>located</s> at the Mt Pleasant observatory is currently undergoing structural repairs as well as motor and receiver installation. This wiki will document the ongoing status of said maintenance.

to:

The 14m telescope located at the Mt Pleasant observatory is currently undergoing structural repairs as well as motor and receiver installation. This wiki will document the ongoing status of said maintenance.

December 12, 2013, at 02:04 AM by 131.217.6.8 -
Changed line 4 from:

The 14m telescope <s>located<\s> at the Mt Pleasant observatory is currently undergoing structural repairs as well as motor and receiver installation. This wiki will document the ongoing status of said maintenance.

to:

The 14m telescope <s>located</s> at the Mt Pleasant observatory is currently undergoing structural repairs as well as motor and receiver installation. This wiki will document the ongoing status of said maintenance.

December 12, 2013, at 02:04 AM by 131.217.6.8 -
Changed line 4 from:

The 14m telescope located at the Mt Pleasant observatory is currently undergoing structural repairs as well as motor and receiver installation. This wiki will document the ongoing status of said maintenance.

to:

The 14m telescope <s>located<\s> at the Mt Pleasant observatory is currently undergoing structural repairs as well as motor and receiver installation. This wiki will document the ongoing status of said maintenance.

December 12, 2013, at 01:53 AM by 131.217.6.8 -
Added line 1:

Added line 4:

The 14m telescope located at the Mt Pleasant observatory is currently undergoing structural repairs as well as motor and receiver installation. This wiki will document the ongoing status of said maintenance.

December 12, 2013, at 01:44 AM by 131.217.6.8 -
Changed line 1 from:

http://www.users.on.net/~cdadsl/14m/aerialView2.JPG

to:

http://www.users.on.net/~cdadsl/14m/aerialView2%20%28Large%29.JPG

December 12, 2013, at 01:43 AM by 131.217.6.8 -
Changed line 1 from:

http://www.users.on.net/~cdadsl/14m/aerialView2.JPG

to:

http://www.users.on.net/~cdadsl/14m/aerialView2.JPG

December 12, 2013, at 01:41 AM by 131.217.6.8 -
Changed line 1 from:

http://www.users.on.net/~cdadsl/14m/aerialView2.jpg

to:

http://www.users.on.net/~cdadsl/14m/aerialView2.JPG

December 12, 2013, at 01:41 AM by 131.217.6.8 -
Changed line 1 from:

http://fourier.phys.utas.edu.au/wiki_images/Panorama_1_sm_800_web.jpg

to:

http://www.users.on.net/~cdadsl/14m/aerialView2.jpg

December 12, 2013, at 01:41 AM by 131.217.6.8 -
Changed line 1 from:

http://fourier.phys.utas.edu.au/wiki_images/Panorama_1_sm_800_web.jpg

to:

http://fourier.phys.utas.edu.au/wiki_images/Panorama_1_sm_800_web.jpg

December 12, 2013, at 01:40 AM by 131.217.6.8 -
Changed line 1 from:

http://www.users.on.net/~cdadsl/14m/aerialView2.JPG

to:

http://fourier.phys.utas.edu.au/wiki_images/Panorama_1_sm_800_web.jpg

December 12, 2013, at 01:39 AM by 131.217.6.8 -
Changed lines 1-2 from:
to:

http://www.users.on.net/~cdadsl/14m/aerialView2.JPG

December 11, 2013, at 11:18 PM by 131.217.6.6 -
Added lines 1-10:

Repair

  • To Be Done
    • thing one
    • thing two
  • Already Done
    • thing one
    • thing two
Edit - History - Print - Recent Changes - Search
Page last modified on June 15, 2016, at 12:20 AM